1. Foundation Excavation Standard

Dig a square foundation pit with a size of at least 80cm × 80cm × 100cm. Remove loose soil inside the pit and compact the bottom layer. Lay gravel for drainage to prevent water accumulation and pole rust.

2. Concrete Pouring Standard

Use C30 reinforced concrete for pouring. Place 4–8 steel bars around the embedded pole for reinforcement. Keep the verticality of the main pole within ±0.5° during concrete solidification. Allow at least 7 days of natural curing before installing the backboard and rim.

3. Height Standard (Official FIBA Standard)

Standard competition height: 3.05m from the ground to the top edge of the basketball rim

Youth adjustable height range: 2.35m–3.05m

The backboard center shall be 15cm above the rim.

4. Backboard Installation Standard

Keep the backboard vertical and parallel to the sideline of the court. The horizontal distance from the backboard surface to the baseline is 1.2m. Tighten all connecting bolts evenly to avoid deformation and shaking during dunking.

5. Anti-Corrosion & Safety Standards

All buried steel parts must be wrapped with anti-rust coating or plastic protective sleeves. The main support pole shall be 1.5m away from pedestrians to avoid collision injuries. The pole surface uses electrostatic powder coating for outdoor anti-UV and anti-rust performance.

6. Court Space Matching Standard

No obstacles within 2 meters around the basketball stand. Reserve sufficient buffer space for athletes to run and jump to ensure sports safety.

7. Post-Installation Inspection

Check verticality, bolt tightness, rim elasticity and backboard stability. Shake the stand with moderate force; no obvious shaking or abnormal deformation is allowed.